Quasi Periodic Oscillations (QPOs) and frequencies in an accretion disk and comparison with the numerical results from non-rotating black hole computed by the GRH code

The shocked wave created on the accretion disk after different physical phenomena (accretion flows with pressure gradients, star-disk interaction etc.) may be responsible observed Quasi Periodic Oscillations (QPOs) in $X-$ray binaries. We present the set of characteristics frequencies associated with accretion disk around the rotating and non-rotating black holes for one particle case. These persistent frequencies are results of the rotating pattern in an accretion disk. We compare the frequency's from two different numerical results for fluid flow around the non-rotating black hole with one particle case. The numerical results are taken from our papers Refs.\refcite{Donmez2} and \refcite{Donmez3} using fully general relativistic hydrodynamical code with non-selfgravitating disk. While the first numerical result has a relativistic tori around the black hole, the second one includes one-armed spiral shock wave produced from star-disk interaction. Some physical modes presented in the QPOs can be excited in numerical simulation of relativistic tori and spiral waves on the accretion disk. The results of these different dynamical structures on the accretion disk responsible for QPOs are discussed in detail.Comment: 13 figures, added reference, accepted for publication in Modern Physics Letters

Cleidooccipital muscle: an anomalous muscle in the neck region

During our routine dissection studies, we encountered a case with abnormal muscle deep to the sternocleidomastoid muscle. According to its origin, insertion and innervation features, the abnormal muscle was considered as cleido-occipitalis muscle

Assessment of genotype x environment interaction on yield and yield components of durum wheat genotypes by multivariate analyses

Wheat breeders have to determine the new cultivars and lines responsive to the environmental changes for grain yield and yield components. Therefore, this study was conducted to evaluate 25 durum wheat (Triticum turgidum spp. durum) genotypes including 12 registered cultivars and 13 advanced breeding lines for their stability grown in three different locations (Tokat-Kazova, Diyarbakir and Sivas-Ulas) of Turkey for two growing seasons (2005-2006 and 2006-2007), and to select genotypes having desirable traits to be used in future durum wheat breeding program. Field trials were conducted in a randomized complete block design with three replications at each location. Days to heading, plant height, number of spikes per square meter, number of kernels per spike, spike weight, 1000 kernel weight and grain yield of the genotypes were evaluated in each location. The regression coefficient (bi) of Finlay and Wilkinson (1963) and mean square of deviation from regression (S2d) of Eberhart and Russell (1966) were used as the stability parameters. The results of combined analysis of variance showed a strong influence of the locations on plant height, number of spikes per square meter, number of kernels per spike,  spike weight, 1000 kernel weight and grain yield. Genotypic effects were mainly observed for spike length and test weight. Year had strong impact only on the days to heading. Ecological conditions of Diyarbakir among locations offer the better opportunity for production of durum wheat. Line 5 and cultivar Gidara were both stable in yield ability and also appeared the stable group based on the cluster analysis. In the first principal component days to heading, number of spikes per square meter and spike length  were the most important traits contributing to variation that obtained about 44.3%. There was a positive relationship between grain yield and number of spikes per square meter together test weight, whereas days to heading and spike length were negatively correlated to grain yield. The results of this study also imply that Line-5 and cultivar Gidara among genotypes were the most stable cultivars and can be used as breeding materials. The days to heading, number of spikes per square meter and spike length could be adequate to introduce the differences among genotypes.Key words: Durum wheat, stability, principal component analysis, cluster analysis

High carrier concentration induced effects on the bowing parameter and the temperature dependence of the band gap of Ga_xIn_1−xN

The influence of intrinsic carrier concentration on the compositional and temperature dependence of the bandgap of GaxIn1-xN is investigated in nominally undoped samples with Ga fractions of x = 0.019, 0.062, 0.324, 0.52, and 0.56. Hall Effect results show that the free carrier density has a very weak temperature dependence and increases about a factor of 4, when the Ga composition increases from x = 0.019 to 0.56. The photoluminescence (PL) peak energy has also weak temperature dependence shifting to higher energies and the PL line shape becomes increasingly asymmetrical and broadens with increasing Ga composition. The observed characteristics of the PL spectra are explained in terms of the transitions from free electron to localized tail states and the high electron density induced many-body effects. The bowing parameter of GaxIn1-xN is obtained from the raw PL data as 2.5 eV. However, when the high carrier density induced effects are taken into account, it increases by about 14% to 2.9 eV. Furthermore, the temperature dependence of the PL peak becomes more pronounced and follows the expected temperature dependence of the bandgap variation

Characterisation of an n-type segmented BEGe detector

A four-fold segmented n-type point-contact "Broad Energy" high-purity germanium detector, SegBEGe, has been characterised at the Max-Planck-Institut f\"ur Physik in Munich. The main characteristics of the detector are described and first measurements concerning the detector properties are presented. The possibility to use mirror pulses to determine source positions is discussed as well as charge losses observed close to the core contact

RAM: A Relativistic Adaptive Mesh Refinement Hydrodynamics Code

We have developed a new computer code, RAM, to solve the conservative equations of special relativistic hydrodynamics (SRHD) using adaptive mesh refinement (AMR) on parallel computers. We have implemented a characteristic-wise, finite difference, weighted essentially non-oscillatory (WENO) scheme using the full characteristic decomposition of the SRHD equations to achieve fifth-order accuracy in space. For time integration we use the method of lines with a third-order total variation diminishing (TVD) Runge-Kutta scheme. We have also implemented fourth and fifth order Runge-Kutta time integration schemes for comparison. The implementation of AMR and parallelization is based on the FLASH code. RAM is modular and includes the capability to easily swap hydrodynamics solvers, reconstruction methods and physics modules. In addition to WENO we have implemented a finite volume module with the piecewise parabolic method (PPM) for reconstruction and the modified Marquina approximate Riemann solver to work with TVD Runge-Kutta time integration. We examine the difficulty of accurately simulating shear flows in numerical relativistic hydrodynamics codes. We show that under-resolved simulations of simple test problems with transverse velocity components produce incorrect results and demonstrate the ability of RAM to correctly solve these problems. RAM has been tested in one, two and three dimensions and in Cartesian, cylindrical and spherical coordinates. We have demonstrated fifth-order accuracy for WENO in one and two dimensions and performed detailed comparison with other schemes for which we show significantly lower convergence rates. Extensive testing is presented demonstrating the ability of RAM to address challenging open questions in relativistic astrophysics.Comment: ApJS in press, 21 pages including 18 figures (6 color figures

Size-controlled conformal nanofabrication of biotemplated three-dimensional TiO2 and ZnO nanonetworks

Cataloged from PDF version of article.A solvent-free fabrication of TiO2 and ZnO nanonetworks is demonstrated by using supramolecular nanotemplates with high coating conformity, uniformity, and atomic scale size control. Deposition of TiO2 and ZnO on three-dimensional nanofibrous network template is accomplished. Ultrafine control over nanotube diameter allows robust and systematic evaluation of the electrochemical properties of TiO2 and ZnO nanonetworks in terms of size-function relationship. We observe hypsochromic shift in UV absorbance maxima correlated with decrease in wall thickness of the nanotubes. Photocatalytic activities of anatase TiO2 and hexagonal wurtzite ZnO nanonetworks are found to be dependent on both the wall thickness and total surface area per unit of mass. Wall thickness has effect on photoexcitation properties of both TiO2 and ZnO due to band gap energies and total surface area per unit of mass. The present work is a successful example that concentrates on nanofabrication of intact three-dimensional semiconductor nanonetworks with controlled band gap energies

Flexible organic-inorganic core-shell nanofibers by electrospinning and atomic layer deposition

Organic-inorganic core-shell nanofibers were fabricated by combining electrospinning and atomic layer deposition (ALD). In the first step, nylon66 (polymeric organic core) nanofibers having different average fiber diameters (∼100 nm, ∼250 nm and ∼650 nm) were electrospun by using different solvent systems and polymer concentrations. In the second step, uniform and conformal layer of zinc oxide (ZnO) (inorganic shell) with precise thickness (∼90 nm) and composition on the round surface of the nylon nanofibers were deposited by ALD. The core-shell nylon66-ZnO nanofibers have shown unique properties such as structural flexibility due to the polymeric core and photocatalytic activity due to the ZnO shell layer

The effect of strain and spatial Bi distribution on the band alignment of GaAsBi single quantum well structure

The band line-up and band offset calculations of GaAs0.978Bi0.022/GaAs single quantum well with spatial changes of Bi composition were reported. The spatial Bi profile and a certain amount of the Bi composition in the barrier layer were determined by HR-XRD measurements. Virtual Crystal Approximation and Valence Band Anti-Crossing models were used including strain effects to obtain conduction and valence band edge shifts with Bi incorporation. Photoluminescence (PL) measurements were performed at a low temperature of 8 K as a function of excitation intensity. The PL spectra have shown asymmetric line shapes, which were fitted with different Gaussian functions. Comparing experimental PL results with calculated band edge energies, it was found that optical transition is a type I under low intensity excitation while the optical transition is switched from type I to type II due to the spatial changes in Bi concentrations. The band offsets?Ec/?Ev were also determined

Hybrid EEFIT mission to february 2023 Kahramanmaraş earthquake sequence

The southwestern part of Türkiye was hit on 6 February 2023 by an Mw 7.8 (epicentre:Pazarcık) and then an Mw 7.5 earthquake (epicentre: Elbistan). The event was followed by tensof thousands of aftershocks including the Mw 6.3 event on 20 February (epicentre: Uzunbağ).This paper reports on the preliminary findings of the mission organised by the UK’s EarthquakeEngineering Field Investigation Team (EEFIT) to the Kahramanmaraş Earthquake sequence ofFebruary 2023. This mission followed a hybrid model, combining field and remote investigationtechniques, to investigate the characteristics of the earthquake sequence, its impact on buildingsand infrastructure, as well as the efficacy of relief, response and recovery operations. The keymessages include that the building stock is hard to categorise which brings along difficulties withdamage assessment, that the recovery and reconstruction require multi-sectoral engagement ofkey stakeholders, and that the auditing and quality control mechanisms within the constructionindustry need revisiting in the way forward for better disaster resilience in Türkiye